Skip to content
LumenaryAcademy
Physical 65 min

Entropy and free energy

Why some changes happen by themselves and others never do — entropy counted and measured, the second and third laws, and the Gibbs energy that decides.

Code tested · 5AI-draftedAwaiting review by a chemist

Your guides: Chloe · The Chemist, Margaret · The Analyst, Gideon · The Sceptic

MotivationH

Which way does the world run?

Leave a glass of iced water on a summer table and the ice melts. It never happens the other way: no glass of lukewarm water has ever been seen to freeze into ice cubes while warming the air around it. A drop of food colouring in still water slowly spreads until the whole glass is tinted, and never gathers itself back into a drop. Iron rusts, but rust never turns back into shiny iron on its own.

The previous lesson showed that energy is conserved, and that all of these could happen in reverse without breaking the first law. Melting ice even absorbs energy: it is endothermic, yet it happens by itself. So energy is not what decides the direction of change. Something else is, and its name is entropy.

This lesson builds entropy twice, from two directions that turn out to agree: by counting the ways a system can share out its energy, and by measuring heat and temperature. Then it combines entropy with enthalpy into the Gibbs energy, the single number chemists use to say whether a reaction can go, and at what temperature a reaction that cannot go becomes one that can.

IntuitionH

Counting the ways

Picture energy as coming in small, identical packets (quanta), shared among the atoms of a solid. Each atom can hold any number of packets. A microstate is one particular way of sharing them: atom 1 has three, atom 2 has none, and so on. A macrostate is what we can actually observe, such as "solid A holds six packets and solid B holds four", which can be realised by many different microstates.

The single assumption behind everything that follows is that, left alone, a system wanders among all its microstates with equal likelihood. Then the macrostate we observe is simply the one with the most microstates, because it is overwhelmingly the most probable. Energy "flows from hot to cold" because there are vastly more ways to share it evenly than unevenly, and the food colouring spreads for the same reason: far more arrangements have the dye spread out than have it gathered in one spot.

Analogy, not a formal construction

Shuffle a new pack of cards, which comes sorted by suit and rank. There is exactly one sorted order and about 8×10678 \times 10^{67} orders in all, so after a good shuffle you will never see the sorted order again, though no law forbids it. Nothing pushes the cards towards disorder; there are simply overwhelmingly more mixed-up orders than sorted ones. Molecules shuffle themselves trillions of times a second.

You can watch this kind of spreading safely in the kitchen with an adult: put one drop of food colouring into a glass of still water without stirring, and another into a glass of warm water, and compare them every few minutes. The warm glass spreads faster (molecules move faster), but both end in the same place.

DefinitionsH

Entropy, two ways

Definition— spontaneous (thermodynamically favourable)

A process is spontaneous if, once started, it can proceed without continuous outside intervention. The word says nothing about speed: diamond turning into graphite is spontaneous at room temperature and pressure, but it is so slow that diamonds last for billions of years. Many chemists now prefer the phrase thermodynamically favourable to avoid the everyday meaning of "spontaneous".

Definition— statistical entropy

If a system in a given macrostate can be in any of WW microstates, all equally likely, its entropy is

S=kBln⁡W,S = k_\text{B} \ln W,

where kB=1.380649×10−23k_\text{B} = 1.380649 \times 10^{-23} J/K is the Boltzmann constant (exact since the 2019 redefinition of the SI). Per mole, kBk_\text{B} becomes the gas constant R=NAkB=8.314R = N_\text{A} k_\text{B} = 8.314 J/(mol K).

The logarithm is what makes entropy add up: two independent systems have W1W2W_1 W_2 microstates together, so their entropies add, kBln⁡(W1W2)=kBln⁡W1+kBln⁡W2k_\text{B}\ln(W_1W_2) = k_\text{B}\ln W_1 + k_\text{B}\ln W_2. The formula is carved on Ludwig Boltzmann's tombstone in Vienna.

Definition— thermodynamic entropy

Rudolf Clausius defined entropy (and coined the word, in 1865) from heat. When a system absorbs a small amount of heat δqrev\delta q_\text{rev} reversibly (slowly, through a sequence of equilibrium states) at temperature TT, its entropy changes by

dS=δqrevT.dS = \frac{\delta q_\text{rev}}{T}.

Entropy is a state function, so for an irreversible process we compute ΔS\Delta S along any reversible path between the same two states.

Theorem— The second law of thermodynamics

In any process, the total entropy of the system and its surroundings (the "universe") does not decrease:

ΔSuniv=ΔSsys+ΔSsurr≥0,\Delta S_\text{univ} = \Delta S_\text{sys} + \Delta S_\text{surr} \ge 0,

with equality only for a reversible process. A process with ΔSuniv<0\Delta S_\text{univ} \lt 0 does not happen.

Theorem— The third law of thermodynamics

The entropy of a perfect crystal of a pure substance approaches zero as the temperature approaches absolute zero.

The third law, which grew out of Walther Nernst's heat theorem of 1906, makes absolute entropies possible. A perfect crystal at 0 K has exactly one microstate, so S=kBln⁡1=0S = k_\text{B} \ln 1 = 0. Measure CpC_p from near 0 K upwards, add ∫Cp/T dT\int C_p/T\,dT and ΔH/T\Delta H/T for every phase change on the way, and you have S∘S^\circ at 298 K. That is why tables list absolute entropies S∘S^\circ, but only differences of enthalpy.

ComputationC

Counting microstates in Python

The simplest model of a solid, due to Einstein (1907), treats it as NN identical oscillators sharing qq energy quanta. The number of ways to do that is a classic counting problem (stars and bars, from combinatorics): arrange qq identical quanta and N−1N - 1 dividers in a row, so

W(N,q)=(q+N−1q).W(N, q) = \binom{q + N - 1}{q}.

Put two such solids, A and B, in contact, so that quanta can move between them, and ask how the energy ends up shared.

python
from math import comb, exp, lgamma

def omega(N, q):
    """Ways to share q identical energy quanta among N oscillators."""
    return comb(q + N - 1, q)

# Two small solids in contact share q = 10 quanta: A has 6 oscillators, B has 4.
NA, NB, q = 6, 4, 10
total = omega(NA + NB, q)
print(f"{'qA':>3} {'Ω_A':>6} {'Ω_B':>6} {'Ω_A·Ω_B':>9} {'probability':>11}")
for qA in range(q + 1):
    w = omega(NA, qA) * omega(NB, q - qA)
    print(f"{qA:3d} {omega(NA, qA):6d} {omega(NB, q - qA):6d} {w:9d} {w / total:11.3f}  " + "#" * round(60 * w / total))
print("total microstates:", total)

# Bigger solids: work with ln Ω (the numbers have thousands of digits).
def ln_omega(N, q):
    return lgamma(q + N) - lgamma(q + 1) - lgamma(N)

NA, NB, q = 3000, 2000, 5000
lnw = [ln_omega(NA, k) + ln_omega(NB, q - k) for k in range(q + 1)]
peak = max(lnw)
w = [exp(x - peak) for x in lnw]                  # relative weights, largest = 1
best = lnw.index(peak)
near = sum(w[best - 100: best + 101]) / sum(w)
print(f"\nN_A = {NA}, N_B = {NB}, q = {q}: most probable q_A = {best}")
print(f"probability that q_A is within ±100 of it: {near:.4f}")
print(f"Ω(q_A = {best}) / Ω(q_A = {q // 2}) = e^{peak - lnw[q // 2]:.1f}")
Runs entirely in your browser, in an isolated worker. Nothing is sent to a server.

With only ten oscillators the most probable split, six quanta in A and four in B, has probability 0.175, and every other split is quite likely too: small systems fluctuate. With 5000 oscillators the energy almost certainly settles at 3000 quanta in A, in proportion to the number of oscillators, so that each oscillator holds one quantum on average in both solids. A split that looks only a little different, 2500 each, is e50.6≈1022e^{50.6} \approx 10^{22} times less likely.

Worked examplesH

Entropy from heat, and the second law at work

For the thermodynamic route we need only Clausius's definition. Heating at constant pressure gives δqrev=Cp dT\delta q_\text{rev} = C_p\,dT, so ΔS=∫Cp dT/T=Cpln⁡(T2/T1)\Delta S = \int C_p\,dT/T = C_p \ln(T_2/T_1) when CpC_p is constant. A phase change at its equilibrium temperature is reversible, with qrev=ΔHq_\text{rev} = \Delta H, so ΔS=ΔH/T\Delta S = \Delta H / T.

python
from math import log

# 1. Entropy from heat: one mole of water taken from ice at 0 °C to steam at 100 °C.
dH_fus, T_fus = 6010.0, 273.15            # J/mol, K
Cp_liquid = 75.3                          # J/(mol K), roughly constant
dH_vap, T_vap = 40660.0, 373.15           # J/mol, K
steps = [("melt the ice", dH_fus / T_fus),
         ("heat the liquid", Cp_liquid * log(T_vap / T_fus)),
         ("boil the water", dH_vap / T_vap)]
for name, dS in steps:
    print(f"{name:16s} ΔS = {dS:6.1f} J/(mol K)")
print(f"{'total':16s} ΔS = {sum(dS for _, dS in steps):6.1f} J/(mol K)")

# Trouton's rule: ΔvapS is about 85-88 J/(mol K) for many liquids, but not for water.
print(f"\nbenzene: ΔvapS = {30720 / 353.24:.1f} J/(mol K);  water: {dH_vap / T_vap:.1f} J/(mol K)")

# 2. The second law decides: does water freeze at -10 °C, and at +10 °C?
for T in (263.15, 273.15, 283.15):
    dS_sys = -dH_fus / T_fus              # freezing (approximation: ignores the small Cp difference)
    dS_surr = +dH_fus / T                 # the released heat warms surroundings at temperature T
    total = dS_sys + dS_surr
    verdict = "freezes" if total > 1e-9 else ("equilibrium" if abs(total) < 1e-9 else "does not freeze")
    print(f"T = {T:6.2f} K: ΔS_sys = {dS_sys:6.2f}, ΔS_surr = {dS_surr:+6.2f}, ΔS_univ = {total:+5.2f} J/(mol K) -> {verdict}")
Runs entirely in your browser, in an isolated worker. Nothing is sent to a server.

Boiling contributes far more entropy than melting (109.0 against 22.0 J/(mol K)): a gas has vastly more room, and so more microstates, than a liquid. Many liquids have an entropy of vaporisation near 85 to 88 J/(mol K) (Trouton's rule; benzene gives 87.0), but water's is larger, 109.0, because hydrogen bonds hold liquid water in a more ordered arrangement than most liquids, so it gains more entropy when it escapes.

The second half explains the ice on the table. Freezing lowers the water's entropy by 22.0 J/(mol K), but the heat it releases raises the entropy of the surroundings by ΔH/T\Delta H/T, which is larger when the surroundings are colder. At −10 °C the surroundings gain more than the water loses, so the water freezes; at +10 °C they gain less, so it does not, and ice melts instead. At exactly 0 °C the two balance: that is the melting point.

Example— The surroundings' share

At constant temperature and pressure, the heat released by the system, −ΔHsys-\Delta H_\text{sys}, flows into surroundings so large that their temperature hardly changes, and the transfer is effectively reversible for them. So ΔSsurr=−ΔHsys/T\Delta S_\text{surr} = -\Delta H_\text{sys}/T. For ammonia synthesis at 298 K, ΔrH∘=−91.8\Delta_\text{r}H^\circ = -91.8 kJ/mol warms the surroundings and gives them +91 800/298.15=+307.9+91\,800/298.15 = +307.9 J/(mol K), while the system loses 198.1198.1 J/(mol K) (four moles of gas become two). The total is positive, so the reaction is favourable at 298 K. At 600 K the surroundings would gain only 153 J/(mol K), less than the system loses, and it would not be.

ExplanationH

The Gibbs energy

Keeping track of the surroundings every time is tedious. Josiah Willard Gibbs, working at Yale in the 1870s, showed how to fold them into a property of the system alone. At constant temperature and pressure, ΔSuniv=ΔSsys−ΔHsys/T\Delta S_\text{univ} = \Delta S_\text{sys} - \Delta H_\text{sys}/T. Multiply by −T-T:

−T ΔSuniv=ΔH−T ΔS≡ΔG.-T\,\Delta S_\text{univ} = \Delta H - T\,\Delta S \equiv \Delta G.

Definition— Gibbs energy

The Gibbs energy (Gibbs free energy) of a system is G=H−TSG = H - TS. At constant temperature and pressure, a process is favourable if ΔG<0\Delta G \lt 0, at equilibrium if ΔG=0\Delta G = 0, and unfavourable if ΔG>0\Delta G > 0 (the reverse process is then favourable). −ΔG-\Delta G is also the largest amount of non-expansion work, such as electrical work, the process can deliver.

Because ΔG=ΔH−TΔS\Delta G = \Delta H - T\Delta S, the signs of ΔH\Delta H and ΔS\Delta S sort reactions into four kinds:

ΔH\Delta HΔS\Delta SFavourableExample
negativepositiveat every temperatureoxidising glucose to CO₂ and water
positivenegativeat no temperaturemaking ozone from oxygen
negativenegativeat low temperaturefreezing, ammonia synthesis
positivepositiveat high temperaturemelting, boiling, decomposing limestone

In the last two rows there is a crossover temperature T∗=ΔH/ΔST^* = \Delta H / \Delta S where ΔG=0\Delta G = 0. If ΔH∘\Delta H^\circ and ΔS∘\Delta S^\circ change little with temperature (as Kirchhoff's law suggests over moderate ranges), we can estimate T∗T^* from 298 K tables.

python
# Standard data at 298.15 K, 1 bar (rounded; NIST Chemistry WebBook, NIST-JANAF).
#            ΔfH° kJ/mol   S° J/(mol K)
data = {
    "N2(g)":      (0.0,     191.6),
    "H2(g)":      (0.0,     130.7),
    "O2(g)":      (0.0,     205.2),
    "NH3(g)":     (-45.9,   192.8),
    "CaCO3(s)":   (-1206.9,  92.9),
    "CaO(s)":     (-635.1,   39.8),
    "CO2(g)":     (-393.5,  213.8),
    "H2O(l)":     (-285.8,   69.9),
    "H2O(g)":     (-241.8,  188.8),
    "C(graphite)": (0.0,      5.7),
    "C(diamond)":  (1.9,      2.4),
}

def dH_dS(reaction):
    dH = sum(nu * data[s][0] for s, nu in reaction.items())          # kJ/mol
    dS = sum(nu * data[s][1] for s, nu in reaction.items()) / 1000   # kJ/(mol K)
    return dH, dS

reactions = {
    "N2 + 3 H2 -> 2 NH3":   {"N2(g)": -1, "H2(g)": -3, "NH3(g)": 2},
    "CaCO3 -> CaO + CO2":   {"CaCO3(s)": -1, "CaO(s)": 1, "CO2(g)": 1},
    "H2O(l) -> H2O(g)":     {"H2O(l)": -1, "H2O(g)": 1},
    "diamond -> graphite":  {"C(diamond)": -1, "C(graphite)": 1},
}
print(f"{'reaction':22s} {'ΔH°':>7} {'ΔS°':>7} {'ΔG°(298)':>9} {'ΔG°(1000)':>10}  ΔG° changes sign at")
for name, r in reactions.items():
    dH, dS = dH_dS(r)
    G = lambda T: dH - T * dS                      # assumes ΔH°, ΔS° independent of T
    cross = f"{dH / dS:6.0f} K" if dH * dS > 0 else "never"
    print(f"{name:22s} {dH:7.1f} {1000 * dS:7.1f} {G(298.15):9.1f} {G(1000):10.1f}  {cross}")

# Coupling in the cell (standard biochemical values at pH 7, kJ/mol):
glucose_phosphorylation = +13.8     # glucose + phosphate -> glucose 6-phosphate + H2O
atp_hydrolysis = -30.5              # ATP + H2O -> ADP + phosphate
print(f"\ncoupled: glucose + ATP -> glucose 6-phosphate + ADP: ΔG°' = {glucose_phosphorylation + atp_hydrolysis:+.1f} kJ/mol")
Runs entirely in your browser, in an isolated worker. Nothing is sent to a server.

The estimates are good. Boiling water should become favourable at 373 K; from room-temperature data alone we get 370 K. Limestone (calcium carbonate) should start to give off CO₂ at 1 bar above about 1110 K, roughly 840 °C, which is why lime kilns run at around 900 °C and above. Ammonia synthesis is favourable only below about 463 K, yet industrial plants run near 700 K because at lower temperatures the reaction is far too slow: a tension resolved in Chemical equilibrium.

−100010020004008001200T / KΔG° / (kJ/mol)463 K1110 KN₂ + 3 H₂ → 2 NH₃CaCO₃ → CaO + CO₂ΔG° > 0: unfavourableΔG° < 0: favourable
Standard Gibbs energy against temperature for two reactions, assuming ΔH° and ΔS° stay at their 298 K values. Each line has intercept ΔH° and slope −ΔS°. Ammonia synthesis (ΔS° negative) rises and stops being favourable near 463 K; limestone decomposition (ΔS° positive) falls and becomes favourable near 1110 K.

Metallurgists draw the same kind of plot for the formation of metal oxides, one line per metal, and call it an Ellingham diagram. Where the line for carbon monoxide's formation falls below a metal oxide's line, carbon can take the oxygen from that metal, which tells a steelmaker at a glance that iron ore can be smelted with coke above a certain temperature. You will meet such diagrams again in phase diagrams in Lumenary Materials.

Worked examplesH

Coupled reactions: how life pays its bills

Living cells build proteins, DNA and sugars, all of which have higher Gibbs energy than the small molecules they come from. They do it by coupling: pairing an unfavourable reaction with a strongly favourable one through a shared intermediate, so that the sum has ΔG<0\Delta G \lt 0. The most common partner is the hydrolysis of adenosine triphosphate, ATP, to adenosine diphosphate, ADP, and phosphate.

Example— Phosphorylating glucose

The first step in using glucose is to attach a phosphate group to it. On its own, glucose + phosphate → glucose 6-phosphate + water has a standard biochemical Gibbs energy ΔG∘′=+13.8\Delta G^{\circ\prime} = +13.8 kJ/mol (the prime means standard conditions at pH 7), so it is unfavourable. The enzyme hexokinase instead transfers the phosphate directly from ATP: glucose + ATP → glucose 6-phosphate + ADP. Because GG is a state function, its ΔG∘′\Delta G^{\circ\prime} is the sum of the two steps, 13.8+(−30.5)=−16.713.8 + (-30.5) = -16.7 kJ/mol, as the last line of the block above shows. The enzyme matters because it couples the two steps physically: it never lets ATP hydrolyse uselessly without the glucose present.

Inside a real cell, ATP is kept far from equilibrium, with much more ATP than ADP, which makes its hydrolysis even more favourable, roughly −50 kJ/mol rather than the standard −30.5. How concentrations change ΔG\Delta G is the subject of the next lesson, and the cell's whole energy economy, in which a person turns over roughly their own body mass of ATP every day, is in Biochemistry.

ExplanationH

Absolute entropies, residual entropy and modern practice

Absolute entropies are measured by low-temperature calorimetry: cool a sample towards absolute zero, measure its heat capacity as it warms, and integrate Cp/TC_p/T. William Giauque, who won the 1949 Nobel Prize in Chemistry for such work, noticed that for a few substances the calorimetric entropy came out smaller than the entropy computed from spectroscopy. The missing entropy is residual entropy: the crystal never reached a single microstate as it cooled. In solid carbon monoxide, the nearly symmetric molecules can freeze in pointing either way, CO or OC, giving up to Rln⁡2=5.76R\ln 2 = 5.76 J/(mol K). In ice, each oxygen has two near and two far hydrogens in many possible arrangements; Linus Pauling's 1935 counting argument gave Rln⁡32=3.37R \ln \tfrac{3}{2} = 3.37 J/(mol K), very close to the measured value. The third law is not violated; those crystals are not perfect.

Today, standard entropies of gases are usually computed from molecular data (masses, bond lengths, vibration frequencies) by statistical thermodynamics, which turns the counting of this lesson into a precise tool (Statistical thermodynamics). In drug discovery, computers estimate how strongly a candidate molecule binds to a protein by computing a free-energy difference with molecular simulation, gradually "transforming" one molecule into another in the computer. Open-source projects such as Open Free Energy, built on toolkits like OpenMM, make such calculations widely available, and as of 2026 they routinely rank candidate molecules to within about 4 kJ/mol (1 kcal/mol) for favourable cases. Engineers apply the same second law to engines and refrigerators in the second law and entropy in Lumenary ME.

Common misconceptionsH

Common misconceptions

Misconception

"Entropy is disorder." It is a useful first picture, but it misleads. Entropy measures the number of microstates, which includes how energy is spread among molecular motions, not only how messy the arrangement looks. Some spontaneous processes produce visible order: crystals grow from solution, and oil and water separate into layers, because the entropy gained elsewhere (in the solvent, or in the surroundings) more than pays for it.

Misconception

"Living things violate the second law by making order." The second law limits the entropy of the system plus its surroundings. A cell lowers its own entropy while releasing heat and small molecules (CO₂, water) that raise its surroundings' entropy by more. A plant runs on sunlight, and the Earth sends back many more, lower-energy infrared photons than the visible photons it receives.

Misconception

"A negative ΔG means the reaction will happen quickly." Thermodynamics says where a reaction can go, not how fast. Petrol and air, sugar and oxygen, and paper and air all have hugely negative ΔG\Delta G and sit unreacted for years. The rate depends on the energy barrier along the way (Chemical kinetics).

Misconception

"If ΔG° is positive, the reaction does not happen at all." ΔG∘\Delta G^\circ refers to every substance in its standard state. Water's ΔG∘\Delta G^\circ for vaporisation at 25 °C is +8.5 kJ/mol, meaning liquid water will not produce vapour at 1 bar; yet puddles evaporate, because the vapour in air is far below 1 bar. The next lesson shows how ΔG∘\Delta G^\circ sets an equilibrium, here the vapour pressure of water.

Exercises

Exercises

Data you may need (298.15 K, 1 bar): S∘S^\circ in J/(mol K) of H₂O(l) 69.9, H₂O(g) 188.8; ΔfH∘\Delta_\text{f}H^\circ of H₂O(l) −285.8 and H₂O(g) −241.8 kJ/mol.

1. Entropy and free energy

Warm-upHuman

In which of these processes does the entropy of the system (the substances named) increase? Select all that apply.

Choose all that apply

2. Entropy and free energy

Warm-upHuman

Three identical energy quanta are shared among three oscillators (an Einstein solid with N=3N = 3, q=3q = 3). How many microstates are there?

3. Entropy and free energy

CoreHuman

Using only the data at 298.15 K given above the exercises, and assuming ΔH∘\Delta H^\circ and ΔS∘\Delta S^\circ do not change with temperature, estimate the temperature (in kelvin, to the nearest kelvin) at which ΔG∘=0\Delta G^\circ = 0 for H2O(l)→H2O(g)\mathrm{H_2O(l)} \rightarrow \mathrm{H_2O(g)}.

4. Entropy and free energy

CoreHuman

A reaction has ΔH∘=−120\Delta H^\circ = -120 kJ/mol and ΔS∘=−250\Delta S^\circ = -250 J/(mol K), both roughly independent of temperature. Which statement is correct?

Choose one

5. Entropy and free energy

CoreHuman

A biosynthetic step has ΔG∘′=+45\Delta G^{\circ\prime} = +45 kJ/mol. If each ATP hydrolysed to ADP and phosphate contributes ΔG∘′=−30.5\Delta G^{\circ\prime} = -30.5 kJ/mol, what is the smallest whole number of ATP molecules that must be coupled to the step to make the overall ΔG∘′\Delta G^{\circ\prime} negative?

6. Entropy and free energy

CoreHuman

Which of these would still have an entropy greater than zero as the temperature approaches 0 K? Select all that apply.

Choose all that apply

7. Entropy and free energy

CoreComputational

Two Einstein solids with NA and NB oscillators share q quanta. Write most_probable_split(NA, NB, q), which returns the number of quanta qA in solid A for which the total number of microstates ΩA(qA) ΩB(q−qA)\Omega_A(q_A)\,\Omega_B(q - q_A) is largest, where Ω(N,q)=(q+N−1q)\Omega(N, q) = \binom{q + N - 1}{q}. If several values of qA tie, return the smallest.

(The starter guesses an even split, which is right only when the solids are the same size.)

Runs entirely in your browser, in an isolated worker. Nothing is sent to a server.

8. Entropy and free energy

StretchComputational

Write favourable_range(dH, dS), where dH is ΔH∘\Delta H^\circ in kJ/mol and dS is ΔS∘\Delta S^\circ in J/(mol K), both assumed independent of temperature. Return the range of temperatures T>0T > 0 (in K) over which ΔG∘<0\Delta G^\circ \lt 0, as a tuple (low, high), using 0.0 for "from absolute zero" and float('inf') for "without upper limit". Return None if the reaction is favourable at no positive temperature.

For example, favourable_range(-91.8, -198.1) should return about (0.0, 463.4).

Runs entirely in your browser, in an isolated worker. Nothing is sent to a server.

Further reading and resources