Skip to content
LumenaryAcademy
Start 45 min

Materials around us

The five families of materials, the properties that tell them apart, and a materials hunt you can do in your own kitchen.

Code tested · 2AI-draftedAwaiting review by a materials scientist

Your guides: Chloe · The Materials Scientist, Margaret · The Tester, Gideon · The Failure Analyst

MotivationH

What is it made of?

Look around the room you are in. A metal spoon, a glass window, a plastic bottle, a wooden chair, a cotton T-shirt, a ceramic mug, a brick wall. Every one of them was made from a material that somebody chose, and usually for good reasons. A spoon made of glass would snap in the washing-up. A window made of steel would keep the rain out but also the light. A bottle made of concrete would be far too heavy to carry.

Materials science asks two questions about every material: why does it behave the way it does? and how can we make it better? The answers have given us everything from stronger, lighter aircraft to smaller phones and safer bicycle helmets. They begin with sorting materials into families and learning the words for what they are like.

DefinitionsH

The five families of materials

There are many thousands of different materials, but almost all of them belong to one of five big families. Materials in the same family tend to behave in similar ways, so knowing the family already tells you a lot.

Definition— the five families of materials

  1. Metals, such as iron, aluminium, copper and gold, and alloys, which are metals mixed with small amounts of other elements. Steel is iron with a little carbon; brass is copper with zinc.
  2. Ceramics and glasses, made from clay, sand and rock: compounds of elements such as silicon, aluminium and calcium with oxygen. Pottery, bricks, tiles, porcelain, cement and window glass belong here.
  3. Polymers, made of very long molecules, like chains thousands of atoms long. Most plastics and rubbers are polymers.
  4. Composites, which combine two or more materials so that each makes up for the other's weaknesses: carbon fibres glued in plastic, glass fibres in a boat hull, steel bars cast inside concrete.
  5. Natural materials, which grow: wood, bamboo, cotton, wool, silk, leather, cork, bone and shell.
FamilyWhat it is usually likeAt home
Metalsshiny, heavy, carries heat and electricity well, bends before it breakscutlery, saucepans, keys, wires, drinks cans
Ceramics and glasseshard, stiff, copes with heat, never rusts, but brittle: it cracks instead of bendingmugs, plates, tiles, sinks, windows, the walls of the house
Polymerslight, easy to shape, does not carry electricity, softens when hotbottles, toothbrushes, phone cases, rubber bands, polyester clothes
Compositesvery strong or stiff for their weight, often expensivecarbon-fibre bicycles and tennis rackets, fibreglass boats, reinforced-concrete floors
Natural materialslight, often strong along the grain or fibre, renewablewooden furniture, cotton and wool clothes, cork boards, leather shoes

The families overlap at the edges. Stone is a natural material and also a ceramic. Wood is a natural composite: long fibres of cellulose (a polymer) glued together by another polymer, lignin. Concrete is a ceramic made by gluing sand and stones together with cement paste, which makes it a kind of composite too. Families are a tool for thinking, not a set of locked boxes.

DefinitionsH

Properties: what a material is like

To choose a material you need words, and numbers, for what it is like. These are its properties. Six of the most important are below.

Definition— density

Density is how much mass is packed into each bit of space: mass divided by volume. It is measured in grams per cubic centimetre (g/cm³). Water's density is 1 g/cm³: one cubic centimetre, a little cube 1 cm on each side, has a mass of 1 gram. Anything denser than water sinks in it, and anything less dense floats.

Definition— stiffness, strength, hardness and toughness

  • Stiffness is how much a material resists being bent or stretched while it is still springy, so that it goes back to its shape when you let go. A steel ruler is stiff; a rubber band is not.
  • Strength is how big a load a material can carry before it gives way, either by bending out of shape for good or by breaking. A steel wire is strong; a cotton thread of the same thickness is not.
  • Hardness is how well a surface resists scratches and dents. Glass is hard; candle wax is soft.
  • Toughness is how well a material resists cracking. A tough material bends or dents and soaks up a blow; a brittle material cracks and shatters. Copper is tough; glass is brittle.

Definition— conductivity

Thermal conductivity is how well a material carries heat, and electrical conductivity how well it carries an electric current. Metals are good conductors of both. Most ceramics, glasses, polymers and natural materials are poor conductors, called insulators.

stiffflexibleholdssnappedscratchdentbrittle: crackstough: bendsStiffnessStrengthHardnessToughnessbends a little or a lot?holds, or gives way?scratches and dents?bends, or cracks?
Four properties that are easy to mix up. Stiffness: under the same weight, a stiff strip hardly bends while a flexible one bends a lot. Strength: a strong thread holds a weight; a weak one snaps. Hardness: a hard surface resists a sharp point that would dent or scratch a soft one. Toughness: a tough plate bends, while a brittle one cracks into pieces.

These words mean different things, and a material can score well on one and badly on another. Glass is stiff and hard, but not tough: a glass that slips from your hand onto a tiled floor shatters. A rubber band is not stiff at all, but it is quite tough: you can stretch it, twist it and stand on it. A steel spring is stiff, strong and tough at once, which is why steel is so useful.

Worked examplesH

A materials hunt at home

You can test materials with things already in your kitchen. Do these with an adult, use only everyday objects, and leave out anything sharp, hot, breakable or valuable.

Example— Sort the kitchen into families

Collect ten small objects: a metal spoon, a wooden spoon, a ceramic mug, a plastic bottle top, a cork, a rubber band, a candle, a cotton tea towel, a drinks can and a pebble from the garden. Sort them into the five families. Which were easy? Which made you argue? (A candle is a puzzle: paraffin wax is made of chain molecules like a polymer's, only much shorter, so most people put it with the polymers. A pebble is a natural ceramic; a drinks can is a metal with a thin coat of plastic on the inside.)

Example— Float or sink: a density test

Fill a large bowl with water and lower each object in gently. The cork, the wooden spoon, the candle and the bottle top float: they are less dense than water. The metal spoon and the pebble sink: they are denser. Now try an apple, and a lump of plasticine, first as a ball and then shaped into a little open boat.

Example— Which feels coldest? A conductivity test

Leave a metal spoon, a wooden spoon and a plastic spoon on the table for an hour, so that they are all at room temperature. Then touch each with the back of your hand. The metal one feels coldest, although a thermometer would show all three at the same temperature. Your skin is warmer than the room, and metal carries heat away from your skin much faster than wood or plastic does. What you feel is not the temperature of the spoon but how fast it takes heat from you.

Example— Scratch and magnet tests

Hardness. Try to scratch each object gently with your fingernail. It marks candle wax easily and dents soft wood, but cannot scratch the mug's glaze or the steel spoon. In 1812 the German geologist Friedrich Mohs made a scale like this for minerals: each one scratches those below it. Talc is 1, quartz 7 and diamond 10, the hardest. Your fingernail comes in at about 2½ and window glass at about 5½.

Magnetism. Hold a fridge magnet to each metal object. A steel food can is pulled hard; an aluminium drinks can is not attracted at all. Recycling plants use exactly this difference, with giant magnets, to separate steel from aluminium, as you will see in Choosing and reusing materials.

ComputationC

Densities and strengths in Python

Here are nine materials, at least one from every family, with their densities and strengths. The program does two things. First it works out how heavy one litre of each would be (a cube 10 cm on each side, the same volume as a one-litre carton of juice), and whether it would float in water. Then it asks a stranger question: if you hung a long rod of each material from the top of a very tall tower, how long could the rod be before it snapped under its own weight? That length depends only on strength divided by density, so it is a fair way to compare strength for weight. Press Run:

python
# Nine materials from the five families, with typical values (rounded).
# density: grams per cubic centimetre (g/cm3)
# strength: megapascals (MPa), the pull on each square millimetre, in newtons,
#           that the material can take before it gives way
materials = [
    # name                          family        density  strength
    ("steel (grade S355)",          "metal",       7.85,    355),
    ("aluminium alloy (6061-T6)",   "metal",       2.70,    276),
    ("titanium alloy (Ti-6Al-4V)",  "metal",       4.43,    880),
    ("copper (soft, annealed)",     "metal",       8.96,     69),
    ("window glass",                "glass",       2.50,     45),
    ("concrete (grade C30/37)",     "ceramic",     2.40,    2.9),
    ("polyethylene (HDPE)",         "polymer",     0.95,     25),
    ("carbon-fibre composite",      "composite",   1.55,    550),
    ("softwood timber (C24)",       "natural",     0.42,   14.5),
]

g = 9.81  # the pull of gravity, newtons per kilogram

print("1. How heavy is one litre (a 10 cm cube)? Will it float in water?")
for name, family, density, strength in sorted(materials, key=lambda m: m[2]):
    floats = "floats" if density < 1.0 else "sinks"
    print(f"   {name:28} {density:5.2f} kg   {floats}")

print()
print("2. Hang a long rod of each material from the top. How long could it be")
print("   before it snaps under its own weight?")
results = []
for name, family, density, strength in materials:
    # strength (newtons per square metre) / weight of a 1 m column (newtons per square metre)
    length_m = (strength * 1e6) / (density * 1000 * g)
    results.append((length_m / 1000, name))
for km, name in sorted(results, reverse=True):
    print(f"   {name:28} {km:6.2f} km  " + "#" * round(km))
Runs entirely in your browser, in an isolated worker. Nothing is sent to a server.

The first list shows that a litre of copper weighs 8.96 kg, more than twenty times as much as a litre of softwood (0.42 kg), and that only the wood and the polyethylene would float. The second list holds the surprise. Steel is one of the strongest materials in the table, yet a steel rod could hang only about 4.6 km before snapping, because steel is also heavy. The aluminium alloy is a little weaker than this steel but only about a third as dense, so it manages 10.4 km; the titanium alloy reaches about 20 km, and the carbon-fibre composite 36 km. Concrete, pulled rather than squashed, manages only 0.12 km, about 120 m. That is why aircraft are built from aluminium, titanium and carbon fibre, and why concrete is always used where it will be squashed, or with steel bars inside it to take the pulling.

Where the numbers come from

Numbers about materials should always come with a source, because every grade of a material is a little different.

  • Densities. The US National Institute of Standards and Technology (NIST) publishes measured densities of every element and of many common materials: iron 7.874, aluminium 2.699, titanium 4.540 and copper 8.960 g/cm³, polyethylene 0.93 and ordinary concrete 2.30. Alloys and grades differ slightly. Steel is usually taken as 7.85, the value in the European design standard for steel structures, and the titanium alloy is lighter than pure titanium because it is mixed with aluminium, a lighter metal.
  • Strengths. Several grade names are their strengths. S355 steel is guaranteed to carry at least 355 MPa before it starts to bend for good, and the 30 in concrete C30/37 is its guaranteed strength in megapascals when squashed; the European design standard for concrete gives its strength when pulled as 2.9 MPa, ten times less. Softwood timber (pine or spruce) of class C24 has a mean density of 420 kg/m³ (0.42 g/cm³) and is expected to take about 14.5 MPa when pulled along the grain, and window glass about 45 MPa when bent; both values come from European product standards. The values for the aluminium alloy, titanium alloy, copper and polyethylene are typical figures from published data sheets (MatWeb collects many), and the carbon-fibre value is near the low end of the range given in Michael Ashby's book (see the references).
ExplanationH

How materials scientists measure and look things up

In a real testing laboratory, materials are measured by methods written down in standards, so that a test done in São Paulo, Pune or Stuttgart gives the same answer. Standards organisations such as ISO and ASTM International publish them. The pulling test Margaret described is called a tensile test. Hardness is measured by pressing a tiny diamond point into the surface with a known force and measuring the size of the dent. Toughness can be measured by swinging a heavy pendulum into a notched bar and seeing how much energy it takes to break it: a brittle bar snaps cleanly, while a tough one bends and tears.

Nobody measures everything from scratch. Engineers look properties up in handbooks, in manufacturers' data sheets and in databases. Some databases hold measurements, like the NIST tables above. Others hold calculations: the Materials Project, run from the Lawrence Berkeley National Laboratory in the United States, lists properties computed from the laws of physics for well over a hundred thousand crystals, many of which have never been made. Later in Lumenary Materials you will learn to do such calculations yourself, in Atomistic simulation and Density functional theory.

Materials scientists work wherever things are made: in steelworks and chip factories, in hospitals designing hip joints from titanium and ceramics, in battery laboratories, in companies making clothes, paints and packaging, and in museums working out how ancient objects were made. Lumenary ME's structures shows how engineers put strong and stiff materials to work, and Lumenary Chemistry's what is matter? starts with the particles everything is made of.

Common misconceptionsH

Common misconceptions

Misconception

"Strong, stiff, hard and tough all mean the same thing." They are four different properties. Glass is stiff and hard but brittle, so not tough. A rubber band is tough but not stiff. A good engineer always asks which kind of "strong" a job needs.

Misconception

"Heavy materials are stronger." Lead is very dense but soft and weak, while carbon-fibre composites are light and very strong. Density and strength are separate properties, and the most useful materials for anything that moves are often the ones that are strong for their weight.

Misconception

"Glass is weak." Glass is very stiff and very strong when squashed, and thin, freshly made glass fibres are stronger than most steels, which is why they are used to reinforce boats and wind-turbine blades. Glass is brittle: a scratch or a chip lets a crack start and run straight through. Toughened glass, used in car side windows and oven doors, is treated so that its surface is permanently squeezed, which makes it much harder for a crack to open.

Misconception

"All metals stick to magnets." Only a few do strongly: iron, most steels, nickel and cobalt. Aluminium, copper, gold, silver and much stainless steel do not.

Misconception

"Plastic is one material." There are dozens of common plastics, each a different polymer with different properties. A soft carrier bag, a clear fizzy-drinks bottle and a hard toy brick are made of three different ones, which matters a great deal when they are recycled.

Exercises

Exercises

Most of these ask you to think; a couple ask for a little arithmetic, and the last asks you to finish a short Python function.

1. Materials around us

Warm-upHuman

The frame of a modern tennis racket is made of thin carbon fibres held together in a hard plastic. Which family of materials does it belong to?

Choose one

2. Materials around us

Warm-upHuman

Which of these are made of polymers? Type the letters, separated by commas.

  • A. aluminium kitchen foil
  • B. a polyethylene carrier bag
  • C. a clay brick
  • D. a rubber band
  • E. a clear plastic water bottle
  • F. a copper wire

Write elements separated by commas. Order and repeats don’t matter — just like in a set!

3. Materials around us

CoreHuman

Amina's ceramic mug has held hot tea every day for years, and spoons have never scratched it. Then it slipped off the table onto the tiled floor and cracked into three pieces. Which property does the mug lack?

Choose one

4. Materials around us

CoreHuman

A metal spoon and a wooden spoon have been lying on the same table all day. The metal one feels colder to touch. Why?

Choose one

5. Materials around us

CoreHuman

A small steel block measures 2 cm by 2 cm by 5 cm. Steel's density is 7.85 g/cm³. What is the block's mass, in grams?

6. Materials around us

CoreHuman

Recycling plants chop plastic bottles into flakes and drop the flakes into a tank of water. Using these densities, which flakes float? Choose all that apply.

Material Density (g/cm³)
PET (the clear bottle) 1.38
HDPE (some bottle tops) 0.95
PVC 1.41
polystyrene 1.06
softwood (a stray bit of pallet) 0.42
Choose all that apply

7. Materials around us

CoreComputational

Finish the two functions by replacing each ....

  • hanging_length_km(strength, density) gives how long a rod could hang, in kilometres, before it snaps under its own weight. strength is in MPa and density in g/cm³. As in the lesson, the length in metres is strength * 1e6 / (density * 1000 * g).
  • best(materials) takes a list of (name, strength, density) and returns the name of the material with the longest hanging length.
Runs entirely in your browser, in an isolated worker. Nothing is sent to a server.

Further reading and resources

  • X-Ray Mass Attenuation Coefficients, Table 1: the elements · NISTAmong much else, this table lists the measured density of every element from hydrogen to uranium.
  • X-Ray Mass Attenuation Coefficients, Table 2: compounds and mixtures · NISTDensities of everyday materials such as polyethylene, PET, ordinary concrete and borosilicate glass.
  • Eurocodes: Building the future · European Commission, Joint Research CentreThe European design standards for structures, which fix the values engineers use for the density and stiffness of steel and the strengths of concrete grades.
  • The Materials ProjectA free database of properties computed for well over a hundred thousand crystalline materials.
  • MatWebA searchable collection of data sheets for metals, plastics, ceramics and composites.
  • DoITPoMS · University of CambridgeFree teaching packages in materials science, with videos of materials being tested.
  • Materials Selection in Mechanical Design · Michael F. AshbyThe classic book on comparing materials, and the source of the property ranges used here for carbon-fibre composites.